BLASTER-BUDDY

Finish Removal System

The Blaster-Buddy finish removing system is the easiest and safest method of removing old finishes from your log home. Your home will be clean, dry and ready to apply beautiful new coats of LifeLine stains and finishes.

The Blaster-Buddy system weighs approximately 450 pounds and is about four feet high. It comes with 50 feet of hose, a remote control unit, an instruction manual, and a safety kit that includes gloves, earplugs, dust masks and a face shield with headgear.

You can rent Blaster-Buddy from Canadian Log Home Supply for $125.00 per day, or $580.00 per week (7 days).

Features and Statistics

• Environmentally friendly
• No water is used - no water gets into your walls
• No caustic strippers and no chemicals
• Clean up is simple - residual materials are bio-degradable
• Once blasting is completed, you are ready to apply a preservative or stain

The preferred abrasive media to use in the Blaster-Buddy is glass-blasting media. Glass-blasting media is an environmentally friendly inorganic abrasive material made by recycling used glass. The high velocity of the media striking the surface removes the finish with minimum damage to the wood. Glass-blasting media is available in 22kg bags (50lbs). One bag will typically clean 7 to 18 square metres (75 to 200 square feet) of surface area depending on the condition of the finish to be removed, age of the wood and wood characteristics.

One bag will typically clean about 75 to 200 square feet of surface area depending on the condition of the finish to be removed, age of the wood and wood characteristics.

Blaster-Buddy

If you would like more information or need a referral to an experienced contractor, or ready to place an order, contact your nearest Perma-Chink Systems, Inc. location.

Back to top